LOKA HAHB remote control
EN
57
Installation and user manual
4. Battery installation
• Put the battery into the installationsite and make sure the positive side of the
battery is in accordance with the positive side of installationsite.(See Fig.3-5)
• Please set the time corrected on the rst time operation. Batteries in the wire
controller can time under power failure which ensure the time keep right. When the
power restores, if the time displayed is not correct, it means the battery is dead and
replace the battery.
Fig. 3-5
NOTE:
Put on a at surface. Be careful not to distort the back plate of the wire controller by
overtightening the mounting screws.
To Next Page
Loading...
