rothaudio.co.uk | 7
USER MANUAL
ENGLISH
Table Top Style
You can mount the Sub Zero II on a cabinet that is
properly designed for a TV.
Wall Mount Style
You can mount the Sub Zero II on a wall by using the
supplied hardware kit. The input jacks and power cord are
designed to allow a flush mount.
Think About Location
Select an area where sunlight will not fall directly on the soundbar. Also, be sure that the location selected allows a free flow of air to and
from the soundbar and power supply. In order to prevent an internal temperature increase, maintain the following space requirements.
Sub Zero II Soundbar
Top / Bottom / Back: No clearance required - can be flush mounted.
Left / Right: At least 6” (150 mm) clearance required.
Front: Open between the Sub Zero II and the listeners.
Getting Started
Determine how you want to set up your Sub Zero II Soundbar.
The following figures show 2 typical installation styles. One is the Table Top style and the other is the Wall Mount style.
Roth Sub Zero II Manual UK EM.indd 7 11/10/2013 10:12
To Next Page
Loading...