Rothenberger Industrial ROTURBO 12000 User Manual (English)

Questions and Answers:

J
janiceshermanAug 20, 2025
How to fix Rothenberger Industrial ROTURBO 12000 that cannot be switched on?
- R
  Rhonda HansenAug 20, 2025
  If your Rothenberger Industrial Gas Heater cannot be switched on, there are several potential causes. First, check the plug and the mains socket to ensure there is a power supply. Then, make sure the gas valve is open and that the gas cylinder is not empty; if empty, replace it. If these steps don't resolve the issue, the on/off switch or the pressure regulator might be defective. For these issues, obtain a replacement switch or pressure regulator from our service center and have them fitted or mounted by an authorized person.
M
Mark MillerAug 22, 2025
Why does the flame on my Rothenberger Industrial ROTURBO 12000 Gas Heater extinguish during use?
- R
  rodneygreerAug 22, 2025
  If the flame of your Rothenberger Industrial Gas Heater extinguishes during use while the ventilator continues running, this could be due to an empty gas cylinder or a defective pressure regulator. Try replacing the gas cylinder first. If the problem persists, purchase a replacement pressure regulator from our service center and mount it as described.
M
millerpatriciaAug 25, 2025
Why is the flame on my Rothenberger Industrial ROTURBO 12000 weak and unsteady?
- M
  Mrs. Kimberly Marshall MDAug 25, 2025
  If the flame of your Rothenberger Industrial Gas Heater is very weak, unsteady, or yellow, the gas cylinder might be almost empty, so try replacing it. Alternatively, the pressure regulator could be defective. In this case, purchase a replacement pressure regulator from our service center and mount it as instructed.
R
Ricardo Hall MDAug 26, 2025
What to do if my Rothenberger Industrial Gas Heater turns off during use?
- H
  hillchristopherAug 26, 2025
  If your Rothenberger Industrial Gas Heater turns itself off during use, the overheat protection device may have been activated. Allow the appliance to cool down completely. Then, try to identify and resolve the cause of the overheating before restarting the appliance.
M
Mrs. Kristina Wilson DDSAug 27, 2025
What to do if flame extinguishes when gas feed button is released on Rothenberger Industrial ROTURBO 12000?
- T
  tony06Aug 27, 2025
  If the flame on your Rothenberger Industrial Gas Heater extinguishes as soon as you release the gas feed button, the safety cut-out may have interrupted the gas supply. To resolve this, repeat the ignition procedure, but this time, keep the gas feed button pressed for a longer duration.
P
Patty MolinaAug 29, 2025
What to do if my Rothenberger Industrial Portable Generator cannot be switched on?
- S
  Scott MatthewsAug 29, 2025
  If your Rothenberger Industrial Portable Generator won't switch on, there are several potential causes. First, ensure there is a power supply by checking the plug and the mains socket. Verify that the gas valve is open and that the gas cylinder isn't empty; if it is, replace the cylinder. Also, the pressure regulator might be defective, requiring a replacement from our service center. Check the hose failure safety device and press the pressure release button. Ensure the gas regulating valve is on the max position by turning it anti-clockwise. Finally, the on/off switch might be defective, and you'll need to obtain a replacement from our service center and have it fitted by an authorized person.
D
Debra Jackson MDAug 31, 2025
Why does the flame extinguish during use, but the ventilator keeps running on my Rothenberger Industrial Portable Generator?
- A
  Alex GarciaAug 31, 2025
  If the flame of your Rothenberger Industrial Portable Generator extinguishes during use while the ventilator continues to run, it could be due to an empty gas cylinder, which requires replacement. Alternatively, the pressure regulator might be defective and needs to be replaced with a new one from our service center.
M
Megan Koch DVMSep 2, 2025
What to do if my Rothenberger Industrial Portable Generator turns itself off during use?
- M
  Mark RodriguezSep 2, 2025
  If your Rothenberger Industrial Portable Generator turns itself off during use, it's likely that the overheat protection device has been activated. To resolve this, allow the appliance to cool down and then try to identify the cause of the overheating.
M
morrowkyleSep 4, 2025
Why is the flame very weak, unsteady, and yellow on my Rothenberger Industrial Portable Generator?
- B
  Blake CarrollSep 4, 2025
  A weak, unsteady, or yellow flame in your Rothenberger Industrial Portable Generator may be due to an almost empty gas cylinder; replace it. Alternatively, the pressure regulator could be defective, in which case you should purchase a replacement from our service center.
J
Joseph KnoxSep 6, 2025
What to do if the overheat protection device turned off the Rothenberger Industrial Portable Generator?
- C
  christinagarciaSep 6, 2025
  If the overheat protection device has turned off your Rothenberger Industrial Portable Generator, allow the appliance to cool down. Then, identify the cause of the overheating.

Rothenberger Industrial ROTURBO 12000 Specifications

General

Gas consumption	1.1 - 2.4 kg/h
Fuel Type	Propane / Butane
Ignition	Piezo ignition
Gas type	Propane, Butane
Heating Capacity	12 kW

Rothenberger Industrial ROTURBO 12000 User Manual

Table of Contents

Questions and Answers:

Rothenberger Industrial ROTURBO 12000 Specifications