To Next PageTo Next PageWhat to do if the flame extinguishes as soon as the gas feed button is released on Rothenberger Industrial Portable Generator?
If the flame of your Rothenberger Industrial Portable Generator extinguishes as soon as you release the gas feed button, the safety cut out has likely cut off the gas supply. To fix this, repeat the ignition procedure, but this time, keep the gas feed button pressed for a longer duration.
What to do if my Rothenberger Industrial Heater cannot be switched on?
If your Rothenberger Industrial Heater won't switch on, try these steps: * Check the plug and the mains socket. * Open the cylinder valve. * Replace the gas cylinder. * Purchase a replacement pressure regulator from our service center and mount it as described above. * Press the pressure release button of the hose failure safety device. * Turn the valve anti-clockwise to max. position. * Obtain a replacement switch from our service centre and have these fitted by an authorised person.
Why does the flame extinguish as soon as I release the gas feed button on my Rothenberger Industrial Heater?
If the flame on your Rothenberger Industrial Heater extinguishes when you release the gas feed button, it's likely that the safety cut out has cut off the gas supply. To resolve this, repeat the ignition procedure and keep the gas feed button pressed for a longer time.
How to fix a weak, unsteady, yellow flame on a Rothenberger Industrial Heater?
If the flame on your Rothenberger Industrial Heater is very weak, unsteady, or yellow, try replacing the gas cylinder. If the problem persists, purchase a replacement pressure regulator from our service center and mount it as described above.
General| Gas consumption | 1.1 - 2.4 kg/h |
|---|---|
| Fuel Type | Propane / Butane |
| Ignition | Piezo ignition |
| Gas type | Propane, Butane |
| Heating Capacity | 12 kW |
