Why does my Rothenberger Roscope 1000 battery not hold a charge?
If the Rothenberger Measuring Instruments' battery isn't holding a charge, it might have discharged during storage; remove the battery when storing the device. Also, runtime depends on LED usage, so recharge the battery more often with extensive LED use. The battery might also be damaged or its life cycles expired, in which case you should replace it.
How to fix a Rothenberger Measuring Instruments display unit that does not turn on?
If the display unit of your Rothenberger Measuring Instruments does not turn on, it could be due to a discharged battery, so try recharging it. Ensure the battery is correctly placed in the battery compartment. If those steps don't work, there may be faulty electronics, and you should contact the Rothenberger Service Center.
What to do if Rothenberger Roscope 1000 display turns on, but does not show image?
If the Rothenberger Measuring Instruments display turns on but doesn't show an image, first check the cable connections to ensure they are secure. If the connections are good, the imager head might be covered by debris; try cleaning it.
Why does my Rothenberger Roscope 1000 video cut off after 10 seconds?
If your Rothenberger Measuring Instruments video cuts off after 10 seconds, this is due to the factory setting for internal memory. To record videos longer than 10 seconds, use an SD card.
What to do if Rothenberger Roscope 1000 Measuring Instruments display shows an unresponsive image?
If the display of your Rothenberger Measuring Instruments shows an unresponsive image, the image processor may have encountered an error. Turn the unit off and then on again to reset the processor.
General| Brand | Rothenberger |
|---|---|
| Model | Roscope 1000 |
| Category | Measuring Instruments |
| Language | English |
To Next Page