What to check if my ROTORCOMP NK 100 Air Compressor system does not discharge?
If your ROTORCOMP Air Compressor system does not discharge (discharge time 100 - 200 seconds, depending on separator size), check the solenoid valve/electrical system.
Why does the control valve constantly discharge in my ROTORCOMP NK 100 Air Compressor?
If the control valve constantly discharges in your ROTORCOMP Air Compressor, check the solenoid valve/electrical system.
Why does oil escape during discharging in my ROTORCOMP Air Compressor?
If oil escapes during discharging (oil foam in fine separator cartridge) in your ROTORCOMP Air Compressor, perform an oil change because the oil type may be incorrect. Also, check the discharge delay valve and use a different nozzle diameter if oil foam forms during stop. Drain off oil if the oil level is too high.
How to fix incorrect rotation direction in ROTORCOMP Air Compressor?
To fix the incorrect rotation direction of your ROTORCOMP Air Compressor, reconnect 2 supply lines because the phases may be reversed.
What causes pressure losses at filter cartridges in ROTORCOMP NK 100 Air Compressor?
To address pressure losses at filter cartridges in your ROTORCOMP Air Compressor, replace the separator cartridge because the pressure loss at the separator cartridges may be too high.
Details on the manufacturer, including general information, purpose, and standard delivery scope for the NK 100.
Explains the meaning of warning, caution, and note symbols used to highlight safety instructions.
Highlights important instructions for installation, commissioning, operation, and maintenance to prevent hazards.
Provides general overviews and component identification for both electric and pneumatic control unit models.
Schematic representations of operating principles and component arrangements for both control unit types.
Details operating modes like standstill, starting, feed phase, and shutdown for both electric and pneumatic systems.
Explains the fine separator cartridge and its role in removing residual oil from compressed air.
Essential safety measures to observe during the installation and assembly process.
Critical safety guidelines to follow during all maintenance, assembly, and repair work.
Details on oil selection, topping up, low temperature measures, and piping material compatibility.
Provides key technical specifications for the NK 100 and NK 100 G compressor models.
General| Brand | ROTORCOMP |
|---|---|
| Model | NK 100 |
| Category | Air Compressor |
| Language | English |
To Next Page