EasyManua.ls Logo

Roughneck 58267 - User Manual

Roughneck 58267
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
READ & SAVE THESE INSTRUCTIONS
Heavy-Duty Air-Operated Oil Pump
With Extension Kit 3:1 or 5:1
Owner’s Manual
WARNING: Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.
Items #58267 & #58268

Questions and Answers

  • D
    David HenryAug 4, 2025
    What to do if my Roughneck 58267 Water Pump fails to operate?
    • C
      Christina RodriguezAug 4, 2025
      If your Roughneck Water Pump isn't working, several factors could be at play. First, ensure adequate air supply pressure and clear any air line restrictions. Next, check for closed or clogged control valves, and open or clean them as needed. Also, inspect the fluid line, hose, valve, and accessories for clogs, relieving pressure and clearing any obstructions. If these steps don't resolve the issue, the air motor may be damaged, requiring assessment and servicing. Finally, confirm that the fluid supply isn't exhausted; refill and re-prime or flush the system if necessary.
  • A
    andrealloydAug 10, 2025
    Why is my Roughneck 58267 operating but outputting low flow?
    • S
      Susan PetersonAug 11, 2025
      If your Roughneck Water Pump is running but the output is low, it could be due to several reasons. A worn piston seal could be the culprit, in which case you should replace it. Similarly, check for worn seals and replace them if necessary. Also, inspect the fluid line, hose, valve, or other accessories for any clogs, and relieve the pressure to clear any obstructions.
  • S
    Stacy BartlettAug 16, 2025
    Why does my Roughneck Water Pump have continuous air exhaust?
    • T
      Tami VasquezAug 16, 2025
      Continuous air exhaust in your Roughneck Water Pump may stem from a worn or damaged air motor gasket or seal. Assess the air motor for wear or damage, and service it accordingly.
  • A
    amyersAug 22, 2025
    What to do if my Roughneck 58267 Water Pump has erratic operation?
    • F
      Felicia WatkinsAug 22, 2025
      If your Roughneck Water Pump is operating erratically, consider these potential causes. First, check if the fluid supply is exhausted; if so, refill and re-prime or flush the system. Another cause might be worn pump seals, which would need replacement. Lastly, inspect the hose for damage and replace it if necessary.
  • J
    Jessica BrownAug 27, 2025
    How to fix a Roughneck 58267 leaking from muffler plates?
    • M
      Manuel MeyersAug 27, 2025
      If your Roughneck Water Pump is leaking from the muffler plates, it is likely due to a worn throat seal. Replacing the throat seal should resolve this issue.

Summary

Important Safety Information

Work Area Safety

Safety precautions for the work area, focusing on cleanliness and hazard avoidance.

Personal Safety

Operator safety, including attire, protective gear, and situational awareness.

Pump Use and Care

Specific Operation Warnings

Main Parts of Product

Assembly Instructions

Grounding

Procedures for ensuring proper electrical grounding to prevent fire and explosion risks.

Installation

Steps for setting up the oil supply system, including valves, filters, and regulators.

Before Each Use

Operating Instructions

Start Up

Step-by-step guidance for initiating the operation of the oil pump system.

Pressure Relief

Procedure for safely reducing fluid pressure in the system to prevent injury.

After Each Use

Maintenance

Troubleshooting

Parts Diagram

Parts List

Replacement Parts

Limited Warranty

Roughneck 58267 Specifications

General IconGeneral
BrandRoughneck
Model58267
CategoryWater Pump
LanguageEnglish

Related product manuals