41
5
6
7
G-SENSOR SENSITIVITY
LCD ON/OFF SETTING
OFF (Default)
1-Min
3-Min
5-Min
Charging - Operate Camera Normally
Connect as a Flash Drive PC/MAC
USB MODE
By turning ON this feature, the camera will automatically
turn the display screen OFF. (Please NOTE that the camera
will stay ON)
When you plug the camera with your 2.5FT short USB cable
to your PC/MAC, this feature allows you to connect your
camera as a flash drive (Select STORAGE). If you just want
to provide power to the camera then select (CHARGING)
G-Sensor is a 3-axis impact gravitational accelerometer
which is designed to detect physical and gravitational forces
on the camera. The higher the G-Sensor setting equates to the
higher the sensitivity setting, meaning more files will be
protected.
While Video is Being Recorded: In the event when G-Sensor
is triggered due to physical or gravitational impact force on
the camera, the current Loop cycle length of video file will be
locked so it will NOT be deleted by Loop cycle function.
CAUTION: In the event of an accident please make sure you
To Next Page
Loading...
