Wipers
42
WIPER CONTROLS
The wipers and washers will only operate when the starter switch is
turned to position ’I’ or ’II’.
Single wipe
Pull the lever down and release.
NOTE: With the lever held down, the wipers will operate at high
speed until it is released.
Intermittent wipe
Turn switch to first position.
Normal speed wipe
Turn switch to second position.
Fast speed wipe
Turn switch to third position.
Windscreen washer
Pull the lever towards the steering wheel. The washers will operate
for as long as the lever is held in this position.
NOTE: The wipers operate automatically during windscreen
washing.
Care Points .........
DO NOT operate the wipers on
a dry screen.
DO NOT operate the wipers
with the bonnet raised.
In freezing or very hot
conditions, ensure that the
blades are not frozen or stuck
to the glass before being
operated.
In winter, remove snow or ice
from around the arms and
blades, including the wiped
area of the windscreen.
H2145
To Next Page