178
Bulb Replacement
SIDE REPEATER LIGHTS
Replacement bulb: 5 watt.
Push the lens firmly towards the front of the car to release the light
unit, then withdraw the light from the wing.
Twist anti-clockwise to release the bulb holder from the light unit.
Pull to remove the bulb from its socket.
When refitting the light unit, first locate the two tabs (arrowed in
illustration), ensuring that they are pointing towards the rear of the
car, then fit the remainder of the light unit into the aperture.
REAR LIGHTS (4 door models)
From inside the luggage compartment, remove the fastener
(illustrated in inset) and pull back the moulded lining as shown.
To remove the fastener, use a pointed tool to push in the centre
(see inset) - the fastener can then be easily extracted from the
moulded lining.
Take care to avoid any contact with a hot exhaust system,
when carrying out any maintenance at the rear of the car.
HB0187
HB0188
To Next Page
Loading...
