INTRODUCTION
2
INTRODUCTION
REPAIRS AND REPLACEMENTS
When replacement parts are required it is essential
that only Rover recommended parts are used.
Attention is particularly drawn to the following points
concerning repairs and the fitting of replacement
parts and accessories.
Safety features and corrosion prevention treatments
embodied in the car may be impaired if other than
Rover recommended parts are fitted. In certain
territories, legislation prohibits the fitting of parts not
to the manufacturer’s specification. Torque wrench
setting figures given in this Manual must be used.
Locking devices, where specified, must be fitted. If
the efficiency of a locking device is impaired during
removal it must be renewed.
Owners purchasing accessories while travelling
abroad should ensure that the accessory and its
fitted location on the car conform to legal
requirements.
The Terms of the vehicle Warranty may be
invalidated by the fitting of other than Rover
recommended parts.
All Rover recommended parts have the full backing
of the vehicle Warranty.
Rover Dealers are obliged to supply only Rover
recommended parts.
SPECIFICATION
Rover are constantly seeking to improve the
specification, design and production of their vehicles
and alterations take place accordingly. While every
effort has been made to ensure the accuracy of this
Manual, it should not be regarded as an infallible
guide to current specifications of any particular
vehicle.
This Manual does not constitute an offer for sale of
any particular vehicle. Rover Dealers are not agents
of Rover and have no authority to bind the
manufacturer by any expressed or implied
undertaking or representation.
To Next Page
Loading...
