Seats
34
Driver’s seat one-touch operation
The one-touch function is operated by briefly
pressing the relevant memory switch (1 or 2).
The seat will then automatically move to the
memory position.
’One touch’ operation can be cancelled at any
time by pressing either of the memory
switches or any of the seat axis switches.
Pressing either of the seat memory switches
stops all movement immediately: pressing one
of the axis switches cancels the memory seat
movement, but starts the seat moving in the
direction of the switch which is pressed.
Release the switch to stop all movement.
• Automatic transmission: the one-touch
function is NOT available when the engine
is running and the gearshift lever is out of
’P’ (park).
Key activated memory seats
The key activated memory seat facility enables
the handsets to be used to recall seat and
mirror positions when you UNLOCK the
doors.
If the vehicle had been superlocked using a
handset, then pressing the UNLOCK BUTTON
on handset 1 for more than 1
1
/
2
seconds,
causes the driver’s seat and both mirrors to
move to the position stored by memory
switch 1. Pressing the UNLOCK BUTTON on
handset 2 for more than 1
1
/
2
seconds, causes
the driver’s seat and both mirrors to move to
the position stored by memory switch 2.
Passenger seat memories
The operation of the passenger seat memories
is the same as that for the driver’s, apart from
the following:
• One-touch operation is available whenever
normal memory operation is available.
• Passenger seat memories do not include
the mirror positions or instrument panel
illumination levels.
• The message centre will not confirm the
storing of a memory position.
To Next Page
Loading...
