Electric windows
70
Overriding the ’anti-trap’ function
Under certain conditions, you may wish to
override the ’anti-trap’ function. If, for
example, you attempt to operate the windows
with the operating mechanism partially frozen,
the ’anti-trap’ function may falsely sense a
trap situation and fail to close the window
(always clear any ice from the window to
prevent overloading the operating
mechanism).
The ’anti-trap’ function can be overridden as
follows:
1. Using the centre console switches only,
press and hold the upper part of the
appropriate window operating switch
within 10 seconds of the window backing
off (after it has falsely sensed a trap
situation).
2. Continue to hold the switch until the
window is either closed or has reached the
desired position (note that as the window
is closing, an audible warning sounds and
’ANTI-TRAP OFF’ is displayed in the
message centre).
NOTE: The ’anti-trap’ function will be
operational again, as soon as the window
operating switch is released.
Rear window isolation switch
Press the bottom of the switch to isolate the
rear window controls (a tone will sound and
the message centre displays ’REAR
WINDOWS OFF’); press the top of the switch
to restore independent control.
Always isolate the rear window switches when
carrying children.
To Next Page
Loading...
