EasyManua.ls Logo

Rover XT133 - Gear Case Lubrication; Muffler Cleaning

Rover XT133
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 15 -
1. Stop the engine to check if there is enough
lubricating grease in the gear case after
every 25 hours of use.
2. Remove the oiling bolt on the gear case.
3. Replenish good quality lithium grease as
ǡƤǤ
4. Screw and tighten the bolt.
GEAR CASE
WARNING : Improper adjustment
may cause damage to the unit. If
engine does not run well after
carburetor adjustment, please
contact the authorized dealer where
you bought the product.
MUFFLER
2. Make sure the unit is cool before any
inspection or cleaning, otherwise you may
ƫǤ
ǤơƫǡƤ
bolt.
Ǥ
carbon deposits or other stain. Clear away
with applicable tools.
ǤƫƤ
ƤǡƫǤ
ǤƫǤ


Ƥ
ǡ


ƫ


Ǥ

Related product manuals