Rover XT133 - User Manual

22 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Safe Operation Practices Set-Up Operation Maintenance Service Troubleshooting

OPERATOR’S MANUAL

WARNING

READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL

BEFORE ATTEMPTING TO OPERATE THIS MACHINE.

FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

XT143/XT133

Brushcutter

769-07051

Table of Contents

Questions and Answers

J
Jeffrey CollinsAug 2, 2025
Why does my Rover XT133 engine have no power or stop during cutting?
- M
  Megan MasseyAug 2, 2025
  Your Rover Brush Cutter might be losing power or stopping because the spool head or blade is entangled with grass. Stop the engine and clean the cutting attachment. It could also be due to a dirty air or oil filter, so clean or replace the filter. Stale or improperly mixed fuel can also cause this issue; empty the tank and refill with a fresh fuel mixture. Finally, the carburetor adjustment might be off.

Summary

Customer Support

Safety Instructions

Symbols

Get to know your Brush Cutter

Assembly Instructions

Install and Adjust the U-Handle

Instructions for attaching and adjusting the U-handle.

Install the Cutting Attachment Shield

Steps to attach the cutting attachment shield to the bracket.

Install the Trimmer Head

Guide on attaching the trimmer head to the output shaft.

Install the Cutting Blade

Procedure for mounting the cutting blade securely.

Fuel and Oil Instructions

Operating Instructions

Starting Cold Engine

Detailed steps for starting the engine from a cold state.

Starting Warm Engine

Procedure for starting the engine when it is already warm.

Stopping Instructions

Steps to safely shut down the engine.

Setting the Length of the Cutting Line

How to extend the cutting line while operating.

Maintenance and Repair

Fuel Filter Maintenance

Instructions for inspecting and replacing the fuel filter.

Air Filter Maintenance

Steps for cleaning and lubricating the air filter.

Carburetor Adjustment

How to adjust the carburetor for optimal performance.

Spark Plug Maintenance

Guide on checking, cleaning, and adjusting the spark plug.

Gear Case Lubrication

Instructions for checking and replenishing grease in the gear case.

Muffler Cleaning

How to inspect and clean the muffler.

Cleaning and Storage

Cleaning the Unit

How to clean the brushcutter after use.

Storage Guidelines

Proper procedures for storing the unit.

Long-Term Storage Procedures

Specific steps for storing the unit for extended periods.

Transportation Safety

Precautions and steps for transporting the unit safely.

Troubleshooting

Specification

Notes

Packing List

Summary

Customer Support

Safety Instructions

Symbols

Get to know your Brush Cutter

Assembly Instructions

Install and Adjust the U-Handle

Instructions for attaching and adjusting the U-handle.

Install the Cutting Attachment Shield

Steps to attach the cutting attachment shield to the bracket.

Install the Trimmer Head

Guide on attaching the trimmer head to the output shaft.

Install the Cutting Blade

Procedure for mounting the cutting blade securely.

Fuel and Oil Instructions

Operating Instructions

Starting Cold Engine

Detailed steps for starting the engine from a cold state.

Starting Warm Engine

Procedure for starting the engine when it is already warm.

Stopping Instructions

Steps to safely shut down the engine.

Setting the Length of the Cutting Line

How to extend the cutting line while operating.

Maintenance and Repair

Fuel Filter Maintenance

Instructions for inspecting and replacing the fuel filter.

Air Filter Maintenance

Steps for cleaning and lubricating the air filter.

Carburetor Adjustment

How to adjust the carburetor for optimal performance.

Spark Plug Maintenance

Guide on checking, cleaning, and adjusting the spark plug.

Gear Case Lubrication

Instructions for checking and replenishing grease in the gear case.

Muffler Cleaning

How to inspect and clean the muffler.

Cleaning and Storage

Cleaning the Unit

How to clean the brushcutter after use.

Storage Guidelines

Proper procedures for storing the unit.

Long-Term Storage Procedures

Specific steps for storing the unit for extended periods.

Transportation Safety

Precautions and steps for transporting the unit safely.

Troubleshooting

Specification

Notes

Packing List

Rover XT133 Specifications

General

Brand	Rover
Model	XT133
Category	Brush Cutter
Language	English

Related product manuals

Preview: Rover XT143