Rover XT143 User Manual

Safe Operation Practices Set-Up Operation Maintenance Service Troubleshooting
OPERATOR’S MANUAL
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
XT143/XT133
Brushcutter
769-07051

Rover XT143 Specifications

General

Shaft Type	Straight
Handle Type	Loop handle
Engine Type	2-Stroke
Cutting Width (line trimmer)	43 cm
Cutting Width (brush cutter)	25 cm

Summary

Safety Instructions

Symbols

READ OPERATING MANUAL

WEAR EYE AND EAR PROTECTION

Ejected objects and excess noise can cause serious injury. Wear protection.

KEEP BYSTANDERS AWAY

EJECTED OBJECTS AND ROTATING PARTS MAY CAUSE SERIOUS INJURIES

Do not use unit if protective housing is not correctly positioned. Keep away from coil.

Assembly Instructions

INSTALL AND ADJUST THE U-HANDLE

INSTALL THE CUTTING ATTACHMENT

Steps to install the trimmer head and cutting blade securely.

Fuel and Oil Instructions

Operating Instructions

STARTING COLD ENGINE

Step-by-step guide for starting the engine when it is cold.

STARTING WARM ENGINE

Procedure for starting the engine when it is already warm.

STOPPING INSTRUCTIONS

How to safely stop the engine and turn off the machine.

SETTING THE LENGTH OF THE CUTTING LINE

Maintenance and Repair

AIR FILTER

CARBURETOR

SPARK PLUG

Cleaning and Storage

LONG-TERM STORAGE

Trouble-Shooting

Engine Does Not Start

Troubleshooting steps for when the engine fails to start.

Engine Does Not Run Constantly at No Load

Engine Does Not Idle

Engine Does Not Accelerate

Engine Has No Power or Stops During Cutting

Troubleshooting for loss of power or the engine stopping during operation.

Specification