4
IMPORTANT SAFETY
INSTRUCTIONS
When using an iron, basic precautions should always be followed, in-
cluding the following:
READ ALL INSTRUCTIONS BEFORE USING
• Only use an iron for its intended use.
• To avoid the risk of electric shock, do not immerse the iron in water or
other liquids.
• Always turn the iron OFF before plugging or unplugging the iron from
the electrical outlet. Never pull on the cord to disconnect the iron from
the electrical outlet; instead, grasp the plug and pull on the plug to
disconnect the iron.
• Do not let the cord touch hot surfaces. Let the iron cool completely
before putting the iron away. Coil the cord loosely around the iron
when storing.
• Always disconnect the iron from the electrical outlet before filling the
iron with water, emptying the water from the iron, and when the iron
is not in use.
• Do not operate the iron with a damaged cord or in the event the iron
has been dropped or damaged. To avoid the risk of electric shock, do
not disassemble the iron. Take it to a qualified serviceman for exami
-
nation and repair. Incorrect assembly might result in a risk of electric
shock when the iron is used after reassembly.
•
Close supervision is required for any appliance used by or near chil
-
dren. Do not leave the iron unattended while the iron is connected or
on an ironing board.
•
Burns can occur from touching hot metal parts, hot water, or steam.
Use caution when you turn a STEAM IRON upside down – there might
be hot water in the reservoir.
• To avoid a circuit overload, do not operate an iron on the same circuit
with another high wattage appliance.
To Next Page
Loading...
Need help?
General
