EasyManuals Logo

Rowenta DW9080 User Manual

Rowenta DW9080
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
* depending on model
WHAT WATER MAY BE USED ?
Your iron has been designed to operate using untreated tap water. If in doubt, check with your
local water authority. However, if your water is very hard, you can mix 50% untreated tap water
with 50% distilled or demineralised water.
The types of water listed below contain organic waste or mineral elements that can
cause spitting, brown staining or premature wear of the appliance: water from tumble
dryers, scented or softened water, water from refrigerators, batteries or air
conditioners, pure distilled or demineralised water or rain water should not be used in
your iron. Also do not use boiling, or bottled mineral water.
IMPORTANT Heat concentrates the elements contained in water during evaporation.
USE
1 Filling the water tank
2 Setting the temperature
Your iron is equipped with the Autosteam Electronic Control function,
which automatically adjusts the steam amount and the temperature
based on the selected fabric for optimum results.
Select the fabric to be ironed by turning the thermostat. The selected fa-
bric will be illuminated on the display.
For perfect results, an optimum position for each fabric has been pre-de-
fined. This position is marked on the dial and also represented with a lou-
der “click” sound. You can also set your iron based on the international
temperature measurements •• •••. Ensure your thermostat dial is po-
sitioned on these settings.
When your iron reaches the required temperature, the thermostat indi-
cator turns off.
You can start ironing.
IMPORTANT The iron takes longer to cool down than to heat up.
We recommend that you start with fabrics to be ironed at a low
temperature.
For mixed fabrics set the temperature for the most delicate fabric.
Set the temperature
control dial on Min.
mark.
Open the filling
inlet. Fill in water
up to the Max.
mark. Close the fil-
ling inlet and return
the iron to the hori-
zontal position.
Plug in
your iron.
Before filling
the water tank,
unplug the iron.
1103905009 DW9080US:110x154 12/06/09 15:54 Page 5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rowenta DW9080 and is the answer not in the manual?

Rowenta DW9080 Specifications

General IconGeneral
BrandRowenta
ModelDW9080
CategoryIron
LanguageEnglish

Related product manuals