6
* depending on model
TIP Always spray starch onto the reverse side of the fabric to be ironed.
3 • Dry ironing
• Set the temperature to suit the type of material without pushing the autosteam trigger and
burst of steam button.
4 • Steam ironing (Autosteam & Steamforce)
• Your iron is equipped with the Autosteam function.
The steam quantity and the temperature will adjust automatically
to the selected fabric.
To get continuous steam pull the autosteam trigger.
Your iron is equipped with a pump called Steamforce Technology which
pushes 30 % more steam into the heart of the fibres. The pump may
make a slight noise.
• This is not a technical fault! A few seconds are required to produce or to
stop the steam.
5 • Burst of steam
• Press the burst of steam button
to generate a powerful jet of steam.
To Next Page
Loading...
Need help?
General