EasyManua.ls Logo

Rowenta DZ9080 - User Manual

Rowenta DZ9080
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Rowenta
196 Boston Avenue
Medford, MA 02155
Tel.: (781)396-0600
www.rowentausa.com
OFFICE LOCATION ONLY.
To service product see service center information below.
If your appliance needs service, ship the product to your nearest
regional service center. Be sure to put your name on the outside of
shipping box (no P.O. boxes please). If in warranty, Rowenta will repair
or replace product at their discretion. If the product is out of warranty,
you will be advised of the cost of repair before any work begins.
Our main service centers are listed below:
Turnpike Appliance Authorized Appliance
3495A Lawson Blvd. 1644 West Ogden Ave.
Oceanside, NY 11572 Downers Grove, IL 60515
516-483-5596 630-852-1550
Service center information is subject to change. Please visit our
website at www.rowentausa.com or call our service center
information line at 781-306-4620. The information line provides
current service center information and listings in California.
Rowenta Werke GmbH, 63016 Offenbach am Main
1103898398/16-06
DZ9080 US 1103898398 10/05/06 11:00 Page 1

Questions and Answers

  • R
    Richard TorresAug 9, 2025
    What to do if my Rowenta DZ9080 Iron does not heat?
    • K
      Kimberly HernandezAug 9, 2025
      If your Rowenta Iron isn't heating, the temperature control might be set too low, so try increasing it. Also, ensure the iron is properly plugged into the outlet. If the auto-off feature has activated, gently move or shake the iron to reactivate it.
  • T
    turnerdavidAug 14, 2025
    Why is my Rowenta DZ9080 leaking water?
    • P
      patricia73Aug 14, 2025
      Your Rowenta iron might be leaking due to overuse of the burst button; allow more time between bursts. Another cause could be using distilled or softened water; switch to spring water or a tap water and spring water mix. Finally, check that you haven't overfilled the tank past the max line and that the filling inlet is properly closed.
  • W
    William GreenAug 19, 2025
    What does it mean when the auto-off light is flashing on my Rowenta DZ9080 Iron?
    • C
      cwallaceAug 19, 2025
      If the auto-off light is flashing on your Rowenta Iron, the auto-off feature has engaged. Move the iron or shake it gently to reactivate it.
  • E
    Elizabeth HickmanAug 25, 2025
    What to do if my Rowenta Iron is emitting a brown or white substance?
    • E
      Eileen JonesAug 25, 2025
      If your Rowenta Iron is emitting a brown or white substance, it could be due to the water quality. Switch to spring water or mix tap water with spring water. It may also be that the garment has not been rinsed sufficiently. Ensure the garment is rinsed thoroughly to remove any detergent deposits or chemicals on new garments.
  • L
    Laura HumphreyAug 29, 2025
    Why the spray function does not work on my Rowenta Iron?
    • K
      kmannAug 29, 2025
      If the spray function on your Rowenta Iron isn't working, especially on first use, priming may be necessary. Fill the iron with water, hold it horizontally, place a finger over the spray nozzle to create a vacuum, and press the spray button 4 to 5 times. Then, remove your finger from the nozzle and press the spray button a few more times.
  • T
    Thomas DuncanSep 4, 2025
    How to increase steam on my Rowenta DZ9080?
    • J
      Jeremy SmithSep 4, 2025
      If your Rowenta Iron isn't producing enough steam, first, ensure that there is sufficient water in the tank. Also, verify that the iron is set to a steam setting. If the Anti-Drip function is active, wait for the soleplate to reach the correct temperature.

Rowenta DZ9080 Specifications

General IconGeneral
Steam Output50 g/min
Water Tank Capacity350 ml
Soleplate MaterialStainless Steel
Anti-Drip SystemYes
Self-CleaningYes
Cord Length2.5 m
Vertical SteamYes
Auto Shut-OffYes
Anti-Calc SystemYes
Weight1.6 kg

Related product manuals