5
- Fill with water (containing no additives) to the
max mark on the water tank. We recommend
using the enclosed filling cup rather than filling
under the tap.
- If equipped with filling inlet cover, slide cover to
close.
If you need to add water during ironing, UNPLUG
the iron and follow the steps above. Ensure iron
heats back to temperature afterwards, that means
thermostat light will go out.
5 • Selecting the Temperature
The digital Temperature Control Dial allows you to closely monitor
the temperature of the soleplate.
Set the temperature control dial according to the
fabric you are ironing.
Check the garment label for appropriate setting.
We recommend using the chart below as a guide.
To Next Page
Loading...
Need help?
General