5
• The thermostat light comes on. It will go out when the soleplate is hot enough.
• Your iron heats up quickly: so begin by ironing fabrics that are ironed at low temperatures
first, then go on to those requiring a higher temperature.
• When ironing fabrics with mixed fibres, set the ironing temperature for the most delicate
fibre. For delicate fabrics we recommend testing the fabric first on an inconspicious place
e.g. (inside the hem).
It is normal for the indicator light to switch on and off during ironing.
If you turn down the thermostat, wait until the thermostat light comes back on before begin-
ning to iron again.
Storage and Maintenance
Store your iron
• Unplug the iron.
• Wait until the soleplate cools down and wind the cord around the heel of the iron.
• Store the cold iron on its heel.
Always set your iron on its heel, in order to avoid damage or scratching to the soleplate.
Caution: placing your iron flat onto a metallic surface might damage or scratch the soleplate.
Cleaning the soleplate
• Unplug the iron, and when the soleplate is just warm, wipe it with a soft cloth.
Never use abrasive or aggressive products.
Environment protection first!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
FR
EN
DE
IT
PT
AR
Fabric
Position of
thermostat cursor
Linen
MAX
C
otton
•
••
Wool
••
Silk
•
Synthetic
(Polyester, Acetate, Acrylic, Nylon)
To Next Page
Loading...
Need help?
General