Need help?Do you have a question about the Rowenta STEAMCARE and is the answer not in the manual?
Indicates the temperature control status of the iron.
Signals the automatic shut-off function of the iron.
Activates a powerful steam burst for stubborn wrinkles.
Releases a fine spray of water to dampen fabric.
Controls the amount of steam released during ironing.
Port for adding water to the iron's reservoir.
Designed for detailed ironing and hard-to-reach areas.
Helps prevent and remove limescale build-up.
Prevents water leakage from the soleplate at low temperatures.
Advanced feature for optimal ironing performance and protection.
Essential precautions for safe operation, covering electrical safety and usage.
Specific warnings regarding unattended use and handling hot parts.
Instructions on suitable water types and avoiding those that damage the iron.
Guidance on proper disposal and recycling of the appliance.
Remove the protective cover from the iron's soleplate.
Adjust the steam lever to the 'STORE' position for initial setup.
Open the water tank filling door before adding water.
Add water to the iron's reservoir.
Fill the water tank only up to the MAX indicator.
Securely close the water tank filling door.
Position the iron on its heel and connect it to the power outlet.
Explains how the iron automatically turns off after inactivity.
How to reset the iron after it has entered auto-off mode.
Adjust the steam lever to the steam icon for steam ironing.
Adjust the steam lever to the 'STORE' position for dry ironing.
Activate the spray function by pressing the dedicated button.
Activate the powerful steam burst by pressing the button for one second.
Wait two seconds and repeat the burst of steam action if needed.
Hold the iron upright and press the steam button for one second.
Wait two seconds and repeat the vertical steam action if needed.
Hold the iron 8 inches/20cm away from the garment for steaming.
Do not direct vertical steaming towards yourself or others.
Always place the iron on its heel when plugged in, not on the soleplate.
Let the iron cool down for 1 hour after unplugging before cleaning.
Clean the cooled soleplate with a damp cloth or sponge.
Do not use detergent, sharp, or abrasive cleaners on the soleplate.
Do not pour water directly onto the iron body.
Disconnect the iron from the power outlet before storage.
Adjust the steam lever to the 'STORE' position to prevent leaks.
Allow the iron to cool for 1 hour after unplugging before storing.
Empty the water tank into a sink before storing the iron.
Wrap the cord around the heel and store the iron in an upright position.
Do not store the iron in a horizontal position.
Clean the anti-calc valve every two weeks for optimal performance.
Ensure the water tank is empty before proceeding with cleaning.
Adjust the steam lever to the 'STORE' position for the cleaning process.
Carefully remove the anti-calc valve from its housing.
Soak the valve for 4 hours in lemon juice or white vinegar.
Rinse the cleaned valve under running water.
Reinsert the anti-calc valve securely; the iron won't function without it.
Perform the self-cleaning operation every two weeks.
Adjust the steam lever to the 'STORE' position for the self-cleaning process.
Fill the water tank with water up to the MAX level.
Connect the iron to the power outlet to initiate the self-cleaning cycle.
Disconnect the iron from the power outlet after the self-cleaning cycle is complete.
Hold the iron over a sink after unplugging to allow water to drain.
Carefully remove the anti-calc valve from its housing.
Gently shake the iron over the sink for one minute to flush debris.
Reinsert the anti-calc valve securely; the iron won't function without it.
Plug the iron back in to complete the self-cleaning process.
Heat the iron for 2 minutes to dry the soleplate.
Let the iron cool for 1 hour, then wipe the soleplate with a damp cloth.
Do not use detergents or abrasive cleaners on the soleplate.
Indicates the temperature control status of the iron.
Signals the automatic shut-off function of the iron.
Activates a powerful steam burst for stubborn wrinkles.
Releases a fine spray of water to dampen fabric.
Controls the amount of steam released during ironing.
Port for adding water to the iron's reservoir.
Designed for detailed ironing and hard-to-reach areas.
Helps prevent and remove limescale build-up.
Prevents water leakage from the soleplate at low temperatures.
Advanced feature for optimal ironing performance and protection.
Essential precautions for safe operation, covering electrical safety and usage.
Specific warnings regarding unattended use and handling hot parts.
Instructions on suitable water types and avoiding those that damage the iron.
Guidance on proper disposal and recycling of the appliance.
Remove the protective cover from the iron's soleplate.
Adjust the steam lever to the 'STORE' position for initial setup.
Open the water tank filling door before adding water.
Add water to the iron's reservoir.
Fill the water tank only up to the MAX indicator.
Securely close the water tank filling door.
Position the iron on its heel and connect it to the power outlet.
Explains how the iron automatically turns off after inactivity.
How to reset the iron after it has entered auto-off mode.
Adjust the steam lever to the steam icon for steam ironing.
Adjust the steam lever to the 'STORE' position for dry ironing.
Activate the spray function by pressing the dedicated button.
Activate the powerful steam burst by pressing the button for one second.
Wait two seconds and repeat the burst of steam action if needed.
Hold the iron upright and press the steam button for one second.
Wait two seconds and repeat the vertical steam action if needed.
Hold the iron 8 inches/20cm away from the garment for steaming.
Do not direct vertical steaming towards yourself or others.
Always place the iron on its heel when plugged in, not on the soleplate.
Let the iron cool down for 1 hour after unplugging before cleaning.
Clean the cooled soleplate with a damp cloth or sponge.
Do not use detergent, sharp, or abrasive cleaners on the soleplate.
Do not pour water directly onto the iron body.
Disconnect the iron from the power outlet before storage.
Adjust the steam lever to the 'STORE' position to prevent leaks.
Allow the iron to cool for 1 hour after unplugging before storing.
Empty the water tank into a sink before storing the iron.
Wrap the cord around the heel and store the iron in an upright position.
Do not store the iron in a horizontal position.
Clean the anti-calc valve every two weeks for optimal performance.
Ensure the water tank is empty before proceeding with cleaning.
Adjust the steam lever to the 'STORE' position for the cleaning process.
Carefully remove the anti-calc valve from its housing.
Soak the valve for 4 hours in lemon juice or white vinegar.
Rinse the cleaned valve under running water.
Reinsert the anti-calc valve securely; the iron won't function without it.
Perform the self-cleaning operation every two weeks.
Adjust the steam lever to the 'STORE' position for the self-cleaning process.
Fill the water tank with water up to the MAX level.
Connect the iron to the power outlet to initiate the self-cleaning cycle.
Disconnect the iron from the power outlet after the self-cleaning cycle is complete.
Hold the iron over a sink after unplugging to allow water to drain.
Carefully remove the anti-calc valve from its housing.
Gently shake the iron over the sink for one minute to flush debris.
Reinsert the anti-calc valve securely; the iron won't function without it.
Plug the iron back in to complete the self-cleaning process.
Heat the iron for 2 minutes to dry the soleplate.
Let the iron cool for 1 hour, then wipe the soleplate with a damp cloth.
Do not use detergents or abrasive cleaners on the soleplate.
To Next Page
General