ROXX CLUSTER S2 - Page 28

28
User
Manual
Main
Menu
Menu
level 2
Menu
level 3
Menu
level 4
Menu
level 5
Menu
level 6
Remark
Settings
Factory /
User Reset
User Reset List
RAW Balance
<RAW/User Calibrated>
Select your User
Reset defaults
LED Frequency <800Hz,
1200Hz, 2000Hz, 3600Hz,
12000Hz, 25000Hz>
Fan <Auto, Silent, Fan Off,
Max. Power>
Transfer Conguration
<including DMX address /
without DMX address>
LED Mode
<Illumination, Boost>
USB Update
<yes/no>
System
Info
Firmware Version vx.xx
Display installed rmware
version
Serial Number 202042200001
RDM UID 0X6a6ahxxxxxxx
Temperatures
Celsius
LED : XXX°C or
Fahrenheit
LED : XXX °F"
LED RGB Panels & Single
Tubes
Display RGB Panels
temperature by celsius or
fahrenheit
LED Centric Tube
Display Centric CW Tube
temperature by celsius or
fahrenheit
Power on Time Total:xxxxxhours
Display xture total power
on time
LED on Time
LED RGB Panels
& Single Tubes
Total:xxxxxhours
Display LED
RGB Panels total
power on time
LED Centric Tube Total:xxxxxhours
Display LED
Centric CW Tube
total power on
time
Errors Errors information Display error codes
Fan Speed
Display the current fan speed