Need help?Do you have a question about the Royal Enfield Classic 500 2017 and is the answer not in the manual?
General| Engine Type | Single Cylinder, 4 Stroke, Air Cooled |
|---|---|
| Displacement | 499 cc |
| Power | 27.2 bhp @ 5250 rpm |
| Torque | 41.3 Nm @ 4000 rpm |
| Fuel System | Electronic Fuel Injection |
| Transmission | 5 Speed Constant Mesh |
| Front Brake | 280 mm Disc |
| Seat Height | 800 mm |
| Fuel Tank Capacity | 13.5 Liters |
| Bore x Stroke | 84 mm x 90 mm |
| Compression Ratio | 8.5:1 |
| Ignition System | Digital Electronic Ignition |
| Clutch | Wet, Multi-Plate |
| Frame Type | Single Downtube, Using Engine as Stressed Member |
| Front Tyre | 90/90 - 19 |
| Rear Tyre | 120/80 - 18 |
| Length | 2140 mm |
| Width | 790 mm |
| Height | 1090 mm |
| Wheelbase | 1370 mm |
| Gearbox | 5-speed constant mesh |
| Front Suspension | 35mm telescopic fork, 130mm travel |
| Rear Suspension | Twin Shock Absorbers |
| Rear Brake | 153mm Drum, Single Lead Internal Expanding |
Identifies controls and indicators on the handlebars.
Locates key components on the right side of the motorcycle.
Locates key components on the left side of the motorcycle.
Operating steering lock, fuel cap, and accessing accessory/battery boxes.
Details on ignition, engine stop, and electric start switches.
Operation of horn, lights, signals, and choke.
How to access the utility box.
Recommendations for rider apparel and helmet.
Guidance on correct posture for stable and safe riding.
Tips for effective and safe braking techniques.
Explanation of the MIL indicator and its function.
Description of the safety feature and reset procedure.
Step-by-step guide for starting with the kick start lever.
Procedure for starting the motorcycle using the electric start.
Instructions for parking the motorcycle on its center stand.
Instructions for parking the motorcycle on its side stand.
Lubricating cables, pivots, drive chain, and checking oil level.
Step-by-step guide for changing engine oil.
Procedures for spark plug maintenance and tyre/wheel inspection.
Instructions for removing and reinstalling the front wheel.
Steps for correctly reinstalling the front wheel.
Procedures for removing and reinstalling the rear wheel.
Adjusting rear brake pedal, drive chain, and fitting chain lock.
How to adjust the spring tension of the rear shock absorbers.
Battery checks, removal, and reassembly procedures.
Steps for replacing the headlamp bulb.
Procedures for replacing tail and indicator bulbs.
Location of fuses and usage list for blade fuses.
Steps for cleaning the air filter element.
Safety measures to take before and during motorcycle washing.
Steps to dry, lubricate, and polish the motorcycle after washing.
Guidelines for starting the motorcycle with electric start.
Diagnosing and resolving issues when the engine won't start.
Troubleshooting engine misfires and irregular running.
Addressing issues with low power, overheating, and excessive fuel consumption.
Diagnosing and fixing poor brake performance and motorcycle wobbles.
Resolving issues with lights, horn, signals, and fuel injection.
To Next Page