Royal Sovereign ARP-1008 - Remote Control; Remote Control Functions

Remote Control
All functions can be accessed from the remote control.
➊
➎
➏
➐
➋
➌
➍
1. Power ON / OFF Button
2. Fan Speed Control
:HIGH  :LOW
3. On / Off Timer Control
In running mode: Auto switch off
In stand-by mode: Auto switch on
Press
or button to adjust the time setting for 1 hour intervals.
4. Fahrenheit / Celsius Selector
5. LCD Display
6. Timer / Temperature Set Control
- Used for adjusting the timer and temperature.
- The default display on the control panel is room temperature.
- When
or key is pressed in cool mode, the set temperature is displayed and may be adjusted.
After 15 seconds the display will revert back to room temperature.
- Timer setting is available from 1~24 hours by pressing the key or
7. Mode Control
Press this button to change the operation mode in the order of :
Notes
- Do not drop the remote control.


Cool Dehumidify
Fan
10