Need help?Do you have a question about the Royal Sovereign RBC-1003 and is the answer not in the manual?
General| Brand | Royal Sovereign |
|---|---|
| Model | RBC-1003 |
| Category | Cash Counter |
| Language | English |
Detects the presence of banknotes in the hopper.
Detects and counts individual banknotes.
Monitors the stacker for filled capacity.
Shows the total number of counted banknotes.
Indicates the current batch count.
Visual indicators for machine functions.
Resets the counting process.
Clears the current count display.
Input keys for setting batch numbers or other functions.
Initiates counting manually.
Enables the cumulative counting function.
Activates/deactivates magnetic counterfeit detection.
Activates/deactivates UV counterfeit detection.
Guides counted bills into the stacker.
Supports stacked bills.
Adjusts hopper plate for banknote thickness.
For portability and storage.
Connects to an external display unit.
Connection for power cord and fuse holder.
Turns the machine on or off.
Holds banknotes to be counted.
Place machine on a flat sturdy surface for safe operation.
Ensure children cannot access the machine during operation.
Keep fingers and clothing away from the hopper.
Do not operate if power cord or plug is damaged.
Do not immerse machine in water or allow liquids inside.
Offers ease and convenience for loading banknotes.
Machine performs self-test; displays error codes for issues.
Detects counterfeit bills using UV sensor.
Detects counterfeit bills using magnetic sensor.
Counts all banknotes placed in the hopper.
Counts banknotes in pre-set batches.
Accumulates counts from previous batches.
Counting begins automatically when notes are loaded.
Allows manual initiation of counting with buttons.
Automatically resets count after clearing stacker.
Adjust UV sensor sensitivity for counterfeit detection.
Adjust magnetic sensor sensitivity for counterfeit detection.
Steps to use the common counting feature.
Steps to set and use the batch counting feature.
Keep machine in a dry area to prevent damage.
Disconnect power for extended periods of non-use.
Use the included cover when the machine is idle.
Regularly clean exterior and sensors with a soft cloth.
Place on surface and turn on the machine.
Choose the desired counting mode.
Place bills evenly into the collection feeder.
Take counted bills from the depository.
Counted bills are ready for storage or bank deposit.
Addresses issues with the left counting sensor.
Addresses issues with the right counting sensor.
Troubleshoots problems with the magnetic sensor.
Troubleshoots problems with the UV sensor.
Troubleshoots problems with the hopper sensor.
Troubleshoots problems with the stacker sensor.
Indicates a UV detection error.
Indicates a magnetic detection error.
Detects when more than one note passes at once.
Detects ripped or half notes.
Indicates a note jam within the machine.
Specifies the counting speed in notes per minute.
Defines the range of banknote dimensions supported.
Specifies the acceptable banknote thickness.
Maximum number of banknotes the hopper can hold.
Type of display used for counts and alarms.
Voltage and frequency requirements for power.
Maximum power usage of the machine.
The total weight of the machine.
Physical size of the machine.
To Next Page
