Royal CAN VAC - HOSE INSTALLATION AND REMOVAL

B. HOSE INSTALLATION AND REMOVAL
NOTE:
UNPLUG CLEANER BEFORE
REMOVING OR INSTALLING HOSE
1. Hold hose adapter end so that
button is at the top
(A).
2. Line up adapter with intake hole
on face of cleaner.
3. Depress button on hose adapter
and slide adapter into intake
hole
(B).
4. Release button. Give hose a
slight tug to be sure it is in
place securely.
A
With a paper bag and the hose
in place, you are ready to begin
vacuuming.