EasyManua.ls Logo

Royal LEXON S20 - User Manual

Royal LEXON S20
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
Operating and Servicing
Instructions
©2009 All rights reserved #1-113918-000-R0 6/09
• Pleasereadthese
instructionscarefully
beforeusingyour
Royal
®
®®LexonS20.

• Letushelpyouputyour
cleanertogetheror
answeranyquestions,call:
1-800-321-1134
(USA & Canada)
• Website:
www.royalvacuums.com
WARNING:
Cleaner assembly may include
small parts. Small parts can
present a choking hazard.
Español - Página E1
For quick reference,please record your vacuum
information below.
Model #:
Mfg. Code:
(Mfg.code located on the bottom of cleaner)
GUIDE D’UTILISATION
Instructionsd’utilisationetd’entretien
©2009 Tous droits réservés Nº 1-113918-000-R0 6/09
• Lireattentivementcesinstruc
tionsavantd’utiliserl’appareil
RoyalMDLexonS20.

• Permetteznousdevousaiderà
assemblervotreaspirateurou
derépondreàvosquestionsen
composantle
1-800-321-1134
(Canada et États Unis)
• SiteWeb:
www.royalvacuums.com
AVERTISSEMENT:
L’appareil peut comprendre de
petites pièces d’assemblage.
Ces dernières présentent un
danger d’étouffement.
Español - Página E1
Veuillez consigner les renseignements concernant votre as-
pirateur ci dessous pour pouvoir les consulter rapidement.
N
o
de modél #:
Code de fabrication:
(Le code de fabrication se trouve sur la partie inférieure
arriére de l'aspirateur)

Table of Contents

Questions and Answers

  • R
    Ricky JonesAug 10, 2025
    Why my Royal LEXON S20 won't turn on?
    • K
      kaylafosterAug 10, 2025
      If your Royal Vacuum Cleaner isn't running, there are several potential causes. First, ensure the power cord is firmly plugged into the outlet. A loose connection can prevent the vacuum from turning on. If the cord is properly connected, check your home's fuse or breaker box, as a blown fuse or tripped breaker can also cause this issue. If the vacuum still won't run, it's possible that the thermal protector has shut off due to high motor temperatures. Finally, the vacuum may need to be serviced.
  • C
    Charles GonzalezAug 15, 2025
    What to do if my Royal LEXON S20 Vacuum Cleaner has no suction?
    • A
      Andrea RobertsAug 15, 2025
      If your Royal Vacuum Cleaner has low suction or isn't picking up dirt effectively, consider these possible causes. Ensure the dirt bag is installed correctly; if not, reinstall it properly. A full dirt bag will also cause this issue, so replace it if necessary. Check for any clogs in the nozzle or dirt passage and remove them. Also, a clogged filter can reduce suction, so clean or replace the filter. Finally, make sure the suction control valve on the hand grip is closed to maximize suction.
  • J
    Jeffrey MyersAug 20, 2025
    How to fix Royal LEXON S20 Vacuum Cleaner Power Nozzle that won't run?
    • J
      Joseph FloresAug 21, 2025
      If the Power Nozzle on your Royal Vacuum Cleaner isn't running, first ensure that the switch on the hand grip is turned to the "On" position. If it is on, check if the brushroll reset has tripped and depress the Reset Button located on top of the Power Nozzle. Also, verify that the floor selector pedal is set to the desired carpet setting and not on bare floor mode. Finally, ensure that the handle is released from the stored upright position by stepping on the wand release pedal to lower the handle and start the brushroll.
  • S
    Sandra HillAug 26, 2025
    Why is dust escaping from my Royal LEXON S20 Vacuum Cleaner?
    • W
      Wesley HaleAug 26, 2025
      If dust is escaping from your Royal Vacuum Cleaner, it's likely due to a few common issues. The dirt bag might be full, so try replacing it. Alternatively, the dirt bag may not be installed correctly, so ensure it is properly installed. Lastly, check that the hose is correctly installed.
  • J
    jennifer03Aug 30, 2025
    What to do if my Royal LEXON S20 Power Nozzle won't pick up?
    • V
      Victoria MartinAug 30, 2025
      If the Power Nozzle on your Royal Vacuum Cleaner isn't picking up dirt, it could be due to several reasons. First, check if the cleaner has low suction. Also, inspect the nozzle or nozzle connector for any blockages and remove them. Check if brushroll is running. If the brushroll bristles are worn, replace the brushroll.
  • L
    Lisa JensenSep 4, 2025
    Why Royal Vacuum Cleaner tools won't pick up?
    • L
      lhallSep 4, 2025
      If the tools on your Royal Vacuum Cleaner aren't picking up, there are a few things you can check. First, see if the hose is clogged; if so, remove the hose and tools to clear the obstruction. Also, inspect the hose inlet for any clogs and clean it if necessary. A full dirt bag can also cause this issue, so replace it if needed. Lastly, a clogged filter can reduce suction, so clean or replace the filter.

Royal LEXON S20 Specifications

General IconGeneral
BrandRoyal
ModelLEXON S20
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals