The IDS-1000B Series Digital Storage Oscilloscope is a versatile instrument designed for capturing and viewing input signals, performing various measurements, and offering extensive configuration options. It is available in 2-channel and 4-channel versions, with bandwidths ranging from 50MHz to 100MHz.
Function Description:
The IDS-1000B series functions as a digital storage oscilloscope, allowing users to capture, display, and analyze electrical signals. It supports basic measurements, automatic measurements (voltage/current, time, and delay), cursor measurements, and math operations including addition, subtraction, multiplication, division, and Fast Fourier Transform (FFT). The device can be configured for various acquisition modes (Sample, Peak Detect, Average), display settings (waveform as dots or vectors, persistence, intensity, graticule), horizontal and vertical view adjustments, and trigger types (Edge, Delay, Pulse Width, Video, Pulse Runt, Rise & Fall, Timeout). It also includes built-in applications like Go-NoGo testing and Remote Disk (for 4-channel models). The oscilloscope features a 7-inch, 800x480 WVGA TFT display for clear visualization of waveforms and measurement results.
Important Technical Specifications:
- Bandwidth: Available from 50MHz to 100MHz (e.g., IDS-1054B: DC ~ 50MHz, IDS-1072B/1074B: DC ~ 70MHz, IDS-1102B/1104B: DC ~ 100MHz).
- Real-time Sampling Rate: 1GSa/s max.
- Deep Memory: 10M points record length.
- Waveform Capture Rate: 50,000 waveforms per second.
- Vertical Sensitivity: 1mV/div to 10V/div.
- Vertical Resolution: 8 bit.
- Input Impedance: 1MΩ//16pF approx. (for channels), 1MΩ//16pF (for EXT trigger).
- Maximum Input Voltage: 300Vrms, CAT I (for channels), ±15V (peak) for EXT trigger.
- Horizontal Timebase Range: 5ns/div to 100s/div (1-2-5 increments).
- Timebase Accuracy: ±50 ppm over any ≥ 1 ms time interval.
- Record Length: Max. 10Mpts.
- Acquisition Modes: Normal, Average (2 to 256 samples), Peak Detect (2ns typical).
- Display: 7" TFT WVGA color LCD, 800 horizontal x 480 vertical pixels.
- Interpolation: Sin(x)/x.
- Waveform Display: Dots, vectors, variable persistence (16ms~4s), infinite persistence.
- Waveform Update Rate: 50,000 waveforms per second, maximum.
- Display Graticule: 8 x 10 divisions.
- Display Mode: YT, XY.
- USB Ports: USB 2.0 High-speed host port X1 (front panel for storage), USB High-speed 2.0 device port X1 (rear panel for remote control/printing).
- Ethernet Port: RJ-45 connector, 10/100Mbps with HP Auto-MDIX (available on 4-channel models only).
- Go-NoGo BNC Output: 5V Max/10mA TTL open collector output.
- Probe Compensation Output: Selectable output frequency (1kHz ~ 200kHz), 2Vpp square wave signal at 1kHz by default.
- Power Supply: 100 - 240V AC, 50 - 60Hz, 30 Watts max.
- Operating Environment: Indoor, 0°C to 50°C, ≤80% RH (40°C or below), ≤45% RH (41°C ~ 50°C), Altitude < 2000m.
- Storage Environment: Indoor, -10°C to 60°C, Up to 93% RH (non-condensing) / ≤40°C, up to 65% RH (non-condensing) / 41°C ~ 60°C.
- Dimensions: 384.0mm (W) x 208.0mm (H) x 127.3mm (D).
- Weight: 2.8kg.
- Safety: EN61010-1:2010 (Third Edition), EN 61010-2-030: 2010 (First Edition).
- EMC: EN 61326-1:2013, EN 55011:2016, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 61000-4-2:2009, EN 61000-4-3:2006+A1:2008+A2:2010, EN 61000-4-4:2012, EN 61000-4-5:2014, EN 61000-4-6:2014, EN 61000-4-8:2010, EN 61000-4-11:2004.
Usage Features:
- Intuitive Interface: Features side and bottom menu keys for selecting options from soft-menus on the LCD. A variable knob and select key are used for adjusting values and making selections.
- Autoset Function: Automatically configures horizontal scale, vertical scale, and trigger source channel for optimal waveform viewing. Offers "Fit Screen Mode" and "AC Priority Mode."
- Run/Stop Key: Freezes or continues signal acquisition, allowing for flexible observation and analysis.
- Single Trigger Mode: Captures a single waveform event and then stops acquisition, useful for observing transient signals.
- Horizontal and Vertical Controls: Dedicated knobs for positioning and scaling waveforms, with push-to-zero functionality for resetting positions.
- Zoom Functionality: Allows for horizontal zooming of waveforms, with adjustable scrolling sensitivity.
- Play/Pause in Zoom Mode: Enables playing through acquired waveforms in zoom mode.
- Measurement Functions: Provides basic, automatic, and cursor-based measurements for voltage, time, frequency, and other parameters. Automatic measurements can be gated to specific areas of the waveform.
- Math Operations: Supports real-time waveform math (addition, subtraction, multiplication, division) and advanced math expressions with various functions and operators. FFT analysis is also available with different window functions (Hanning, Hamming, Rectangular, Blackman).
- Trigger System: Comprehensive trigger types including Edge, Delay, Pulse Width, Video, Pulse Runt, Rise & Fall, and Timeout, with adjustable parameters like source, slope, level, and coupling.
- Save/Recall: Allows saving and recalling waveforms, images (BMP/PNG), and panel settings (proprietary .set format) to internal memory or USB flash drives. Supports creating and editing labels for easy identification of saved files and channels.
- File Utilities: Provides tools for file navigation, creating/deleting/renaming folders and files, and copying files to USB.
- Built-in Help: Context-sensitive help menu accessible via the "Help" key, providing information on front panel key usage.
- Remote Control: Supports remote control via USB (serial COM port) and Ethernet (socket server functionality for 4-channel models).
Maintenance Features:
- Signal Path Compensation (SPC): Used to compensate for internal signal path variations due to ambient temperature, optimizing oscilloscope accuracy. Requires disconnecting all probes and cables and a 30-minute warm-up.
- Vertical Accuracy Calibration: A self-calibration procedure to ensure vertical accuracy, involving connecting the CAL output to the input channels.
- Probe Compensation: Allows users to adjust the probe to ensure a flat square waveform edge, compensating for probe characteristics. The probe compensation output provides a 2Vpp, 1kHz square wave signal by default, with adjustable frequency.
- Firmware Updates: Firmware can be downloaded from the RS PRO website and updated via a USB memory stick.
- Optional App Installation/Uninstallation: Software applications can be installed or uninstalled to extend the oscilloscope's functionality.
- Erase Memory: Function to erase all internal waveforms, setup files, and labels from the internal memory.
- Cleaning: Disconnect power before cleaning. Use a soft cloth dampened with mild detergent and water. Avoid harsh chemicals.
Need help?
General
To Next Page
