To Next PageTo Next Page
Need help?Do you have a question about the RS PRO RS-156H and is the answer not in the manual?
General| Product Type | Digital Multimeter |
|---|---|
| Display Type | LCD |
| Continuity Check | Yes |
| Diode Test | Yes |
| Safety Category | CAT III 600 V |
| Display Count | 4000 |
| DC Current Measurement | 10A |
| AC Current Measurement | 10A |
| Resistance Measurement | 40MΩ |
| Voltage Range AC | 600 V |
| Voltage Range DC | 600 V |
| Current Range AC | 10 A |
| Current Range DC | 10 A |
| Resistance Range | 40 MΩ |
| Capacitance Range | 100 μF |
| Temperature Range | 1000°C |
| Battery Type | 9V |
Compact gauge for non-destructive, fast, precise coating thickness measurements.
Works on magnetic induction for steel, eddy current for non-ferrous metals; LCD display.
Instructions for powering on the gauge, battery checks, and initial calibration.
Explains how to select working modes, probe modes (AUTO, Fe, No-Fe) for measurement.
Procedure to select the measurement unit (e.g., um, mils) for the gauge.
Instructions for adjusting the brightness of the LCD backlight.
Details on how to disable the auto power-off feature.
How to view stored measurement data and delete data by group or all.
