EasyManua.ls Logo

RS SAILING Aero - Plastic Rings

Default Icon
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
6. Attach the blue rope to the plastic ring with a Knot on a Knot
7. Tie the Blue Elastic onto the plastic hook with a Knot on a Knot
8. Connect the hook onto the ring.
11. Thread the elastic through the bow tting
12. Repeat the above process on the other side.
13. As you tie the elastic onto the 2nd hook,
Pull enough tension in the system to stop
the lines drooping down
9. Stretch the elastic forwards towards the bow.
10. Do not put the elastic through the forward barrel
Do not over tighten the
screw when retting
Make sure there is enough tension in the
elastic to stop the lines from drooping down.