5
Preparation
Your RS Aero comes complete with all the components necessary to take the boat sailing.
In order to commission it, you will need the following tools:
• Pliers or a shackle key
• Sharp knife
• Small at head screwdriver
• PVC electrician’s tape
It will take around 1 1/2 hours to prepare your Aero so make sure you allow plenty of time.
Whilst your RS Aero has been carefully prepared, it is important that new owners should
check that shackles and knots are tight. This is especially important when the boat is new,
as travelling can loosen seemingly tight ttings and knots. It is also important to check
such items prior to sailing regularly.
DO NOT use a knife or other sharp object to cut through packaging containing
parts – you may damage the contents!
4. Commissioning
To Next Page
