3.11 - Completion
a)
b)
Now you are almost ready to go Feva sailing. All that is left to do is:
• Fit the rudder to the back of the boat
• Tidy the halyards away
• Check that all knots and shackles are tied securely
• To t the rudder, simply line up the pins with the tting on the back of the boat and
push down until the retaining clip ‘clicks’ into place.
The rudder may be difcult to get on at rst – all it will need is a simple wiggle from
side to side whilst pushing down.
• To remove the rudder, simply push the retaining clip in and pull the stock up.
• Coil the main and jib halyards neatly and stow them in the halyard bag.
TIME TO GO SAILING!
To Next Page
Loading...
