12
6. Raise the mast and position the
mast heel in the centre of the mast
step. (Note - This is a two person
operation as someone will need to
hold the mast upright while the
shrouds and forestay are
connected)
CAUTION
CON TACT WITH OVERHEAD ELECTRICAL WIRES COULD BE FATAL, EXERCISE
XTREME CAUTION WHEN RAISING THE MAST LAUNCHING & SE AILING.
t
gaged correctly
as show
ud anchor
on in the
e vernier
9. Attach the
on the port
7. Ensure
position
he mast heel is
ed and en
n.
8. Attach the shrouds to the shro
point with the adjuster pin positi
3
rd
hole down on the back of th
adjuster.
forestay on to the deck fairlead
bow deck as shown.
To Next Page
