Boom and Vang
1.
2
3. Ensure the
shackled securely
ast.
r purcha
s ring t
system.
Aft Block
own.
sh
t s
ainsheet
t in the c tion
bossed on the side of
ts
art.
ip - Best practise is to tie t
f the mainsheet to on
raps to prevent tangling and the
lling overboard.
15
Unpack the boom.
. Attach the boom to the mast as shown.
lower vang purchase system is
to the tang on the lower aft
face of the m
se assembly
here are no
4. Hook the vang uppe
on to the boom en
sts or fouls in the
u
twi
5. Tie the mainshee
mainsheet bridle u
a sh
t through the block on the
sing a half hitch stopper knot
eet through the blocks and to
wivel cleat as shown.
Tip - double check the m
through the auto ratche
shown by the arrow em
the auto ratchet block.
6. Feed the main
the mainshee
passes
orrect direc
7. Vang tension is controlled
aft rope and fairlead/clea
hw
using the
on top of the
he loose end
e of the rear toe
sheet
t
T
o
st
fa
To Next Page
