17
then pull the two trailing ends of the
sheet through the loop you have
created to lock them in place as
ng
them through their respective
starboard jib
fairleads/cleats.
10. tie the s
angling and i
11. g line. The
the
in front
of the jib sheet track/cleat)
8. Find the centre of the jib sheet and
pass it through the clew of the jib,
shown.
9. Pass one jib sheet either side
of the mast before threadi
heet ends together in the middle of the
nhibit sheets falling overboard.
port and
Tip – Best practise is to
boat to prevent t
Furl the jib by pulling the furlin
furling line/cleat can be found on
starboard side of the foredeck just
a.
To Next Page
Loading...
