Picture 3.22 The Rudder Fitted in the Stock
Picture 3.23 The Rudder Downhaul
3.9 Hoisting the Mainsail
To complete this section, you will need:
• The mainsail
• The mainsheet
To rig the mainsheet:
1. Tie one end of the mainsheet through the middle of the forward block in
the middle of the boat using a bowline (see picture 3.24).
2. Lead the other end up to the forward block on the boom, passing it
through from back to front (see picture 3.25).
To Next Page
Loading...
