28
10. Tie a stopper knot in the end of the mainsheet, and thread it through the eye on the
pulley at the end of the boom.
11. Take the mainsheet clip from the Tera Rope Pack and thread it onto the mainsheet.
12. Thread the mainsheet through the pulley at the end of the boom.
13. Attach the mainsheet clip on the mainsheet onto the clip on the mainsheet bridle, and
wrap PVC tape around the clips.
14. Lead the mainsheet along the boom, through the tabs on the boom pad and the pulley
on the boom.
Mainsheet Clip
Mainsheet
Mainsheet
Bridle
To Next Page
Loading...
