5
2. EC CONFORMITY AND IDENTIFICATION
The RS Tera complies with the EU Directive for Recreational Craft (RCD) which sets safety
requirements for recreational boats sold in Europe. Each RS Tera carries the CE mark to indicate
this compliance. The CE Mark is on the Builder’s Plate in the cockpit. The Builder’s Plate also
includes important safety information which is described in detail elsewhere in this manual.
Compliance with the EU Directive for Recreational Craft (RCD) is also demonstrated by the EC
Declaration of Conformity in this manual (see page 6).
A RS Tera dinghy can be identified by the Craft Identification Number, which is a unique serial
number on the starboard side of the transom, and is shown on the EC Declaration of Conformity in
this manual.
Each RS Tera is also assigned a unique sail number, which is marked on the bottom of the CE
Declaration form, or can be obtained from RS Racing or your RS dealer. Normally, it is a
requirement that your sail numbers are displayed at sailing regattas. Sail numbers can be
purchased from RS, your RS dealer, or from a sailmaker.
To Next Page
Loading...
