31
5. To remove the rudder, simply push the rudder retaining clip in towards the transom, and
slide the rudder stock upwards.
Make sure that you attach the shock-cord retainer, with a bowline, to the daggerboard
handle.
TIME TO GO SAILING!!
After launching, the rudder is lowered by releasing the uphaul line and pulling the elastic
tight. The daggerboard can be inserted in the daggerboard case when the water is deep
enough. It is normally best to leave the kicking strap loose while launching, pulling it on as
appropriate once you are sailing.
TOP TIP
Make sure that you un-cleat the rudder and raise the daggerboard before coming in
To Next Page
Loading...
