Using the camera
7
Retrieving your videos
Retrieving using a PC/Mac:
Connect the camera to a computer using the supplied Mini USB cable. The
camera will automatically turn on.
The computer will detect a “removable disk”, similar to connecting a USB Flash
Drive on your computer.
Navigate to the corresponding folder to access video recordings;
Recording Type Folder Location
Normal Recording \MOVIE
Emergency Protected \MOVIE-RO
Video Snapshot \PHOTO
Retrieving using Mobile App:
Connect your smartphone to the camera’s Wi-Fi SSID. After a successful
connection, tap the icon located at the bottom left of the screen. A list of
available video les will be shown on the App.
Firmware Upgrade
Step 1: Download latest rmware from our website (www.rsc-labs.com), and
unzip/extract the ZIP le.
Step 2: Copy & Paste or drag & drop the extracted .bin le to the root of the
Micro SD card.
Step 3: Insert the Micro SD card into the camera’s card slot once the transfer is
completed.
Step 4: Connect the camera into a power source and then turn the camera ON.
Step 5: The LED indicator will start ashing to conrm the update progress.
Step 6: Once the upgrade is completed, the camera will automatically reboot.
Step 7: To verify the installed rmware version, access the ‘Version’ tab on the
mobile app.
Step 8: Before using the camera, please reformat the memory card using the
mobile app.
Please Note:
• To ensure a stable rmware upgrade, we recommend formatting the memory
card prior to the upgrade process.
• DO NOT unplug or power-off the camera during a rmware upgrade process,
as it may cause repairable damage to the camera.
To Next Page
Loading...