RTI RHS780 User Manual

Page 1 of 5
Knob
560-80201-00
023-80147-00
FSC to ACME
Adapter
Blue - Low Side
Field Service Coupler
023-80096-00
Field Service Coupler
023-80095-00
Red - High Side
Yellow Hose (30 inch)
Blue Hose (11 feet)
028-80036-02
028-80035-02
Red Hose (11 feet)
360-80464-03
Valve
Anti-blowback
Oil Drain Bottle
026-80207-00
Oil Charge Bottle
026-80208-00
Unpacking - RHS780
Thank you for opening the envelope and reading this documentation. Your new
RHS780 was carefully assembled and will begin generating profits for you in just a
few minutes.
1. Please follow these simple instructions to ensure your new machine survived
any rough handling it may have experienced during transport.
2. Immediately report any visible damage to the unit. Save the shipping carton for
inspection by a claims adjuster. Call RTI Technologies at 800-468-2321 (ext
259) for instructions.
3. Cut and remove all hold-down straps including the one underneath the front of
the unit.
4. Remove protective plastic cover.
5. Carefully tip unit and remove cardboard blocks from
underneath.
6. GENTLY ease the unit off the pallet.
7. Unscrew knob from top and store on rear of unit. This
knob restrains the internal cylinder during shipping and
should be used during any future shipping. A hole plug is
provided to insert in the hole on the top.
8. Refer to the illustration below and verify that all accessories were received.

RTI RHS780 Specifications

General

Brand	RTI
Model	RHS780
Category	Sander
Language	English

Summary

Unpacking RHS780

Unpacking Instructions

Follow step-by-step instructions to safely unpack the RHS780 unit from its shipping container.

Accessory Verification

Verify all included accessories were received by comparing them to the provided illustration.

Setup and Component Identification

Attaching Accessories

Connect hoses and bottles to the RHS780 unit as per the setup instructions for proper operation.

RHS780 Component Overview

Identify key components of the RHS780 unit, including gauges, switches, and connection ports.

Filling the Internal Cylinder

First-Time Refrigerant Transfer

Procedure for transferring new refrigerant into the RHS780's internal cylinder for initial use.

Function Tests

Evacuate Hoses and Test Vacuum

Perform vacuum tests on hoses to ensure system integrity and proper operation of the vacuum pump.

Fill Hoses and Test Charge

Test the charging process by filling the high and low side hoses with refrigerant.

Function Tests and Conclusion

Recover Refrigerant and Test Recycle

Test the refrigerant recovery and recycle process to ensure efficient operation.

Concluding Remarks and Next Steps

Confirmation of successful tests and recommendations for using the RHS780 for AC service.