C. Power Off of T2i, T2x, T3x, T4x Remote Controls
Press and hold the “Backlight” button, then the “OK” button and hold them both for
approximately 5 seconds until the remote turns Off.
D. Reset the T2i Remote Control
Press and hold the “Backlight” button, then press the “OK” button and hold them both
for at least 12 seconds until the T2i reboots.
E. Access the Control Panel of T2i, T2x, T3x, T4x Remote Controls
The Control Panel page can be displayed by holding down the “Backlight” button for
approximately 5 seconds until the control page loads.
To exit, tap the touchscreen anywhere.
To Next Page
Loading...
