19
It’s Under Control
®
If you are having problems with your RTI ZM-24 Transceiver Module, use
the troubleshooting steps below.
If you continue to have problems:
Refer to the Dealer section of the RTI website for further troubleshooting
steps: www.rticorp.com/dealers
Refer to Chapter 7 for more information on contacting RTI technical
support.
STATUS LIGHT ACTIVITY
LIGHTS
Status = Red
Activity = Green
The ZM-24 conguration mode and network connection status can be
determined by looking at the Status and Activity LEDs. Please refer to the
Dealer section of the RTI website (www.rticorp.com/dealers) for the latest
description of the LED states (On/Off/Blinking) and what they mean.
RF COMMUNICATION ISSUES
Verify that ZM-24 modules being used as “repeaters” have been
programmed using the ZB-Pro.
Try a different ZM-24 removable antenna.
If a wireless network is not established, try moving ZM-24 modules
closer together.
CHAPTER 5 | TROUBLESHOOTING
To Next Page
Loading...