RTX RTX745 Series - Active Call; On-Hold Call

RTX745x GUIDE 1.0 13 | P a g e
Proprietary and Confidential
Fig. 11 Incoming call Fig.12 Call swap Fig. 13 Call queue (#15)
5.2 Active call
When a call is active, the base displays the active call and the audio path is connected between the far-end party and
RTX725x headset. It is not possible to have more than one active call on a single line at the same time.
Fig.14 Active call
5.3 On-hold call
When a call is put on-hold, the base displays a hold call status and the audio path is disconnected between the far-end
party and the RTX725x headset (Fig.15 Two calls, one on hold). It is not possible to set EHS active call on-hold by the
base.
Fig.15 Two calls, one on hold