Rubbermaid Slim Jim User Manual (English)

To Next Page

Slim Jim

Recycling Station Assembly Guide

Attach Connector to Base

2. Slide connector upward until tabs click into place.

Align Base to Connector

1. Align connector underneath base rim, matching tabs to

respective holes.

Connect Additional Base

3. Lift second base on top of connector, pressing down on base to

snap tabs into place.

Parts Included:

Bases Billboards*

Connectors

Lid inserts*

Lids

Labels x10*

*Billboards, Lid Inserts, and Labels not included with 23G and 33G

Slim Jim Recycling Station Starter Kits (2007913 and 2171553)

Need help?

Do you have a question about the Rubbermaid Slim Jim and is the answer not in the manual?

Rubbermaid Slim Jim Specifications

General

Shape	Rectangular
Brand	Rubbermaid
Product Name	Slim Jim
BPA Free	Yes
Color	White
Material	High-density polyethylene (HDPE)

Align connector under base rim, matching tabs to respective holes.

Slide connector upward until tabs click into place.

Lift second base on top of connector, pressing down to snap tabs into place.

Align label edge to billboard line, then smooth upward into recessed area.

Insert the tab on the bottom of the billboard into the base handle until it clicks.

Feed lid insert through lid opening, ensuring tab is outside. Snap pegs into holes.

Place lids on top of the bases.