Rubi DC-250 - The value of machine vibration DC UNE-EN 61029 is 6.53 m; s2 with a typical dispersion SN-1 0,10 of the coefficient series variation CV values 0.02.

ENSAYO VIBRACIÓN / VIBRATION TEST / ESSAI DE VIBRATION / ASSAIG DE VIBRACIÓ / ENSAIO DE VIBRAÇÃO / PROVA DI VIBRAZIONE /
VIBRATIONSPRÜFUNG / TRILTEST / VIBRATION TEST / ВИБРОИСПЫТАНИЯ / TITREŞIM TESTI / PRÓBA WIBRACJI / TÄRINÄTESTI / MĚŘENÍ
VIBRACÍ
26.
The value of machine vibration DC UNE-EN 61029 is 6.53 m / s
2
with a typical dispersion SN-1 0,10 of the coefficient series variation CV values 0.02.
- The said vibration total value was measured according to a standardized test method can be used to compare one tool to another.
- The declared vibration total value may also be used in a preliminary assessment of exposure.
- The vibration emission during actual use of the tool may be different from the total declared value, depending on how the tool is used.
- It is necessary to identify security measures to protect the operator, which are based on an estimated exposure for actual conditions of use (taking into account all parts of
the operating cycle, such as the time that the tool is switched off and when it is running on empty, and the starting time)