RUD VLBG User Manual

1
VLBG
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
73428 Aalen
Tel. +49 7361 504-1370
Fax +49 7361 504-1460
sling@rud.com
www.rud.com
RUD-Art.-Nr.: 8500972-EN / 03.019
Load Ring for bolting
>VLBG<
Safety instructions
This safety instruction/declaration of the manufacturer has to be
kept on le for the whole lifetime of the product.
Translation of the original instructions
EN
EC-Declaration of conformity
According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments
Manufacturer: RUD Ketten
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
We hereby declare that the equipment sold by us because of its design and construction,
as mentioned below, corresponds to the appropriate, basic requirements of safety and
health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below
mentioned harmonized and national norms as well as technical specifications.
In case of any modification of the equipment, not being agreed upon with us, this declara-
tion becomes invalid.
Product name: Load ring VLBG
_____________________________________________
_____________________________________________
The following harmonized norms were applied:
DIN EN 1677-1 : 2009-03 DIN EN ISO 12100 : 2011-03
_________________ _________________
_________________ _________________
_________________ _________________
_________________ _________________
_________________ _________________
The following national norms and technical specifications were applied:
BGR 500, KAP2.8 : 2008-04
_________________ _________________
_________________ _________________
_________________ _________________
_________________ _________________
_________________ _________________
Authorized person for the configuration of the declaration documents:
Michael Betzler, RUD Ketten, 73432 Aalen
Aalen, den 26.09.2016 Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
_____________________________________________
Name, function and signature of the responsible person
EG-Konformitätserklärung
entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II A und ihren Änderungen
Hersteller:
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
Hiermit erklären wir, dass die nachfolgend bezeichnete Maschine aufgrund ihrer Konzipie-
rung und Bauart, sowie in der von uns in Verkehr gebrachten Ausführung, den grundle-
genden Sicherheits- und Gesundheitsanforderungen der EG-Maschinenrichtlinie
2006/42/EG sowie den unten aufgeführten harmonisierten und nationalen Normen sowie
technischen Spezifikationen entspricht.
Bei einer nicht mit uns abgestimmten Änderung der Maschine verliert diese Erklärung ihre
Gültigkeit.
Produktbezeichnung: Lastbock VLBG
_____________________________________________
_____________________________________________
Folgende harmonisierten Normen wurden angewandt:
DIN EN 1677-1 : 2009-03 DIN EN ISO 12100 : 2011-03
_________________ _________________
_________________ _________________
_________________ _________________
_________________ _________________
_________________ _________________
Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:
BGR 500, KAP2.8 : 2008-04
_________________ _________________
_________________ _________________
_________________ _________________
_________________ _________________
_________________ _________________
Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:
Michael Betzler, RUD Ketten, 73432 Aalen
Aalen, den 26.09.2016 Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
_____________________________________________
Name, Funktion und Unterschrift Verantwortlicher
Load Ring in pink - for bolting
VLBG

RUD VLBG Specifications

General

Type	Lifting Point
Material	Alloy Steel
Safety factor	4:1
Swivel	360 degrees
Pivot	180 degrees
Thread size	M8 - M48

Summary

Safety Instructions

General Safety Instructions

Key safety warnings and precautions for using VLBG lifting points.

Intended Use

Defines the specific applications and purposes for which VLBG lifting points are designed.

Assembly and Instruction Manual

General Information

Provides essential background on VLBG assembly, including temperature and material considerations.

Hints for Assembly

Offers detailed guidance on the correct procedure for assembling VLBG lifting points.

User Instructions

Explains the correct operational procedures for using VLBG lifting points.

Allowed Lifting and Turning Operations

Specifies the permissible methods for lifting and turning loads with VLBG.

Forbidden Lifting and Turning Operations

Outlines prohibited lifting and turning methods that must be avoided with VLBG.

Dismantling and Assembling the RUD Bolt

Step-by-step instructions for removing and installing the RUD bolt in VLBG.

Inspection and Repair

Hints for Periodical Inspections

Provides guidance on how often and what to inspect periodically for VLBG.

Test Criteria for Regular Visual Inspection

Lists the checks users should perform during routine visual inspections of VLBG.

Additional Test Criteria for Competent Person

Details the inspection requirements for qualified personnel and for repair work.