Rugged Computing RM-60 User Manual

USER GUIDE
RM-60 60-WATT RADIO
Power
Button
Monitor
No
Function
Function
Button
Squelch Adjust
Button
Scan/Skip
Indicator
Channel
Number
Battery Voltage Scan &
Lock/Unlock
Microphone
Port
Programming
Port
Transmit
Light
Channel
Dial
Volume
Dial
Rugged Radios | www.ruggedradios.com | 888-541-7223
**NOTE: This guide applies to radios purchased after 09/01/2018. Your
radio was pre-programmed and fully optimized before shipping to you.
Youʼre not required to use the guide. Go out and play!
Scan Mode:
Scan Mode allows you to scan through all of the programmed channels
to look for radio traffic.
• Press P5 to enter scan mode.
Keypad Lock/Unlock:
• TO LOCK/UNLOCK: Press and hold the P5 button on the radio for two
seconds. A small symbol will appear/disappear on the top right
corner of the display to confirm that the keypad is locked/unlocked.
Push-to-Talk
Button

Rugged Computing RM-60 Specifications

General

Brand	Rugged Computing
Model	RM-60
Category	Radio
Language	English

Summary

Scan Mode

Enter Scan Mode

Press the P5 button to activate scan mode and cycle through programmed channels.

Keypad Lock/Unlock

Lock and Unlock Keypad

Press and hold the P5 button for two seconds. A key symbol indicates lock/unlock status.